| |
|
PUNCHES
|
 |
 Punches are manufactured from selected carbon steel. Hardened and tempered to withstand continuous use. Well cut knurling provides extra secure grip. Square heads on nail and center punches provides a larger striking face and also prevent " roll away " on work benches. Punches sets are packed in attractive plastic boxes, wallets and kits. |
| |
| SAFETY MEASURES |
- Always use the correct type and size of the punch for the job
- Never use a dull punch, or one with a mushroomed head
- Do not use any punch if it is bent or shows dents, cracks, chips or excessive wear
|
When striking a punch always ensure that the striking face of hammer should have a
diameter of approximately 3/8" larger than the struck face of the punch |
 |
|
| |
|
HAMMERS |
The top quality hammer are made from selected steel and to the highest product specifications. The striking faces are expertly heat treated, finished and then fixed to softer material in order to act as a form of cushion. These hammer are always fitted with chemically treated and seasoned wood or steel shafted handles. It is ensured that head of a hammer is securely fixed to the handle. These top quality hammers last longer and gives extra safety. |
| |
| SAFETY MEASURES |
| ALWAYS |
NEVER |
-
Always select the correct type and size of the hammer
-
Always strike squarely with hammer striking face parallel with surface being struck to avoid glancing blows as well as over and under strikes
-
Always use when striking other tools (chisel, punch, etc) the striking face of hammer should have a diameter approximately 3/8" larger than the struck face of the tool
|
-
Never use a hammer when face shows mushrooming, chipping, cracks or excessive wear
-
Never strike with a side of hammer
-
Never strike one hammer to another or hatchet
-
Never use a hammer with loose or damaged handle
-
Never weld, regrind or reheat treat a hammer
|
|
|
| |
|
|
|
|
|
>> Next |
| |
|
|
